Advertisement
From Russia with Lens
We'd been hearing conflicting reports about those new, low-cost Russian cameras. So we decided to check them out for ourselves.
Making quality movies is usually an expensive proposition. But thanks to a formerly socialist government which now chooses to compete in something other than an arms race, the U.S. is seeing an insurgence o• "techno-goods" from Russia.
Several months ago I read a one-inch blurb in a video magazine about a Russian-built 16mm spring-wound camera. I can't find the article now, but I remember making a mental note of the less than $400 dollar price tag.
After testing one recently, I can say that the Russians have made a friend for life out of this tightwad producer. I live by the age-old rule of "putting the bucks on the screen." We all know that camera rentals can be costly. Often would-be filmmakers lose the urge after they read the rate card at the camera rental company. But there is now a viable alternative - that can capture beautiful issues/08/images at a bargain-basement price. A camera company named Zenit, located about 20 miles northwest of what most maps refer to as Moscow, in the town of Krasnogorsk, manufactures no-nonsense, built-like-refrigerator movie cameras. Zenit has crafted quality movie cameras for a number of years. As can be imagined, the factory artisans who construct these cameras are not the highest paid in the world. They do, however, make an incredibly inexpensive camera named after the city from which it originates. The "Krasnogorsk-3," or simply "K-3" could be the best buy in filmmaking today.
 |
A company named Mentor USA, Inc. started importing the K-3's in December of 1992. The original K-3's were surplus inventory which had sat on factory shelves for a few years after production of the model had ceased. "Quality control had not been monitored," states Dohn Thornton, President of Mentor USA, Inc. He says the first batches of cameras had bubbles in the lenses and poor polishing on the aperture plates. Owners of these cameras were given replacements when the defect was discovered.
Since May, 1993, the K-3 has been back in production. Support documents and camera labels are now in English and the quality control is at a level acceptable to discerning filmmakers. Mentor initially imported several 16mm models and a 35mm movie camera. Because of the popularity of the K-3 and problems with the other 16mm and 35mm cameras, the K-3 camera is now the only one they stock. Mr. Thorton sent me a sample K-3 (which had just cleared the customs house) for evaluation. To my surprise, this is not a cheap plastic toy, but a real honest-to-goodness made-of-metal camera. It tips the scales at approximately 13 pounds with its included accessories. On-the-shoulder weight is just over 10 pounds with a 100-foot spool of 16mm film stock.
The K-3 comes packaged in an ominous looking blue box labeled "CINE CAMERA - KRASNO-GORSK-3". It's styling is what I refer to as "Early MIG." Like the Russian MIG fighters, the K-3 is heavy but very functional. The camera body has a black colored crinkle finish, with a vinyl-like covering on the sides.
On the right side of the camera body you'll find a large key which can be lifted and wound like a huge wind-up alarm clock. To wind you turn it counter clockwise (which is opposite to most wind-up devices). The wind-up is tight-feeling, giving the impression of a really substantial main spring.
Adjacent to the wind-up key are two small knobs. The one closest to the top of the camera is used to match frame speed to the exposure index (E.I.) or ASA rating of the film. This setting must be made to get an accurate indication from the built-in light meter, and to expose film correctly. The scale has ASA numbers up to 200 and a tick mark past that which I assume is about 250 ASA?
The small knob on the bottom right side selects frame rates. You simply turn the knob in either direction until a red dot adjacent to the frame rate on the inner scale aligns with a red dot on an outer fixed scale.
The eye piece on the upper right rear of the camera is oriented in a straight-ahead position. It can be focused by screwing the eye piece in or out. Tightening an adjacent set screw with your fingers fixes eyepiece focus. This is a true reflex viewfinder with a polished metal shutter, providing the eye with a dimmer image than a glass shutter found in more expensive cameras.
On the left side of the camera is a single lift-and-turn tab which allows access to the film compartment. Opening the film compartment requires a clockwise quarter turn. The K-3's interior is simple but effective. The upper reel feeds the lower take-up reel. Loading requires feeding the film between a sprocketed drum-and-roller assembly. Pushing the power trigger threads film through to the take-up reel. It's not quite that simple, though, as IT explain later.
A 17-69mm f1.9 screw-on zoom lens is standard on the camera, which incorporates a nifty lever-actuated zoom. Mentor also stocks additional Russian-made lenses at very reasonable prices. A company in New York called ICBM is selling lens adapters that will allow the use of Arriflex BL mount lenses. They also sell a matte box, video tap, etc. designed exclusively for the camera. The power trigger is a push-to-activate and release-to-stop button located on the front lower right side of the camera. Some people may complain about its weight, but the added mass felt good in a hand-held position and should equate to steady hand-held or great vertical pans.
I spoke with several people who had used the camera in a production environment. Gary Spradling (Scarlet Red Pictures, Redmond, Washington) used the camera to film the trailer for a picture he shot last summer called Flak Jacket. (Note: Gary shot a documentary on an award-winning music video I recently produced. He's an incredible talent whose opinion I value highly). He had nothing but praise for the camera, but at first was admittedly apprehensive about the quality of picture that would materialize from the K-3. After the first roll of film was processed and viewed in post he was ecstatic at the on-screen quality. He had used Kodak 7291, exposing it at 100 ASA, and said only slight color corrections were made. His most tedious task was the winding of film stock from larger reels to the 100- footers that fit the K-3. (Note: Most popular film stock is available on daylight load 100' spools).
Loading the camera with the small reels was initially awkward, so he cut off a few feet of film stock and practiced in the daylight. Gary said this is a good idea for anyone, even experienced loaders. He also had to make a screw adapter for the mounting plate he uses. (Note: Mentor's K-3 now comes with a mount adapter).
The accompanying photo shows you the $375 dollar package (including shipping) provided by Mentor USA, Inc. Here is a list of what's included:
(1) 16mm spring-wound tine camera body with built in light meter and frame selectable rates of 8, 12, 16, 24, 32 or 48 fps.
(5) 100 foot reels
(1) Screw on hand grip.
(1)Thread adapter to allow use of base/mounting plates common in the U.S.
(4) Light filters with M77 X 0.75 thread mounts.
(1) 17-69 mm f1.9 zoom lens and mount.
(1) 1734 mm supplemental close-up lens (screws to zoom lens).
(1) eyecup.
(1) Cable release for use in single frame photography.
(1) Battery for the internal light meter. (Mentor has a huge supply of these unique power cells for $5.00each if you want extras, otherwise use your ownhand held light meter).
(2) Lens caps.
(1) Sun shade.
(1) Extended activation leverfor the zoom.
(1) Screw on shoulder brace.
(1) Wrist strap.
(1) Felt-lined leather case with shoulder strap.
The spring-wind on the K-3 takes about 20-22 winds before a stop is felt, Gary reported. This provided him 20 seconds of run time, certainly adequate for most projects. If you want longer takes you'll have to acquire a motor drive. The K-3 can be fitted with a crystal sync motor for roughly $900 dollars. Dohn Thornton told me that Zenit is also developing a retro-fit motor drive, but has not released an availability date. Tobin Cinema Systems in Seattle can do the job for about the same price.
For those requiring 6-minute takes, a 400-foot housing is due out in the near future. You can send your camera back to Mentor for this modification. This should eliminate some of the loading difficulties, particularly the winding of the 100-foot reels.
Although this camera was designed for MOS filmmaking, it }s perfect for documentaries or commercials which utilize V/O and even music videos which have the talent acting out roles to their music backing track. The prestigious USC School of Cinema and Television has fifteen of the K-3's. Mr. Dick Martin, Director of Operations and Facilities Management at the school, provided me with a telephone commentary on USC's use of the K-3's. His comments were both positive and negative. On the plus side he stated the camera was an excellent buy for the price; the filters included in the accessory kit were good for black and white photography, and their K-3's provided a very stable picture.
His down-side comments were that the camera is heavy, not well-balanced with the standard zoom lens, and was difficult for some students to load. (Note: Northwestern University uses the K-3 in its film school, and has a staff person to load the camera because of the student loading difficulties they encountered). Martin also noted that despite the K-3's minor annoyances, several USC students liked the camera well enough to purchase one for themselves.
At present USC is using the Arri-S as their main student camera, and have relegated the K-3s to backup status.
As a veteran owner of lots of cameras I have to agree with the purchasing departments of these film schools. This camera is a steal at twice the money.
Jack Watson is President of The Olympic Production
Company in Gig Harbor, Washington, He is an award-winning producer,
director and camera operator. In his spare time he can be found
in the cockpit of a Boeing 747 which he flies for Northwest Airlines.
SHARE THIS STORY |
TAGS |
Digg
StumbleUpon
Facebook
Del.icio.us
Reddit
YahooAdvertisement
COMMENTS | POST A COMMENT 
- Comment by leupold riflescopes on 10/30/08 at 9:49 am
Only about Russians could write this ...
- Comment by killroy on 11/04/08 at 1:09 pm
I’ve used three K-3 in the past( one serviced and fitted with a crystal sync motor) and all three jammed and scratched the negative continuously. It’s much better to save up an buy a good used Bolex, Arri S or a Scoopic instead of this piece of junk.
- Comment by jessica on 12/22/08 at 10:20 pm
How can you love someone without any kind of attractions, your right about what you did, I just want to satisfy myself, by the way I found out something about cinematography.I really find it to be a great info.Thanks for sharing it…
http://www.shadesofsplendor.com- Comment by Igor on 5/02/09 at 2:38 am
A few online outfits, such as Kiev/USA, NCS Products, and MacJava, offer to modify K-3’s for about $425, or sell K-3’s that have had these modifications done for between $725-825. Supposedly these modifications reduce or eliminate problems with jamming and the film being scratched. Has anyone used one of these modified K-3’s? I wonder how hard it would be to perform these modifications yourself. At the $320 (including the lens, accessories, and shipping from Eastern Europe to North America) these cameras go for N.I.B. on eBay, they’re tempting, but once you get into the $700+ range for a modified one, the gap between it and the more established brands isn’t as wide and you might almost better off buying a Bolex or something like that.
I watched footage online that was shot with the K-3 by several different photographers and much and maybe most of it had a noticeable lack of sharpness compared to footage shot with other cameras. Might this suggest that K-3’s are more difficult to focus?
- Comment by Igor on 5/02/09 at 2:45 am
typo: ...you might almost _be_ better off…
- Comment by Igor on 5/02/09 at 2:49 am
BTW, I emailed NCS Products a week or more ago about these cameras and never got a response. Not a good sign…
This story was published in the August 1994 MovieMaker Magazine. The headline was:
From Russia with Lens / We'd been hearing conflicting reports about those new, low-cost Russian cameras. So we decided to check them out for ourselves.
Order this issue | Subscribe to MM
SITE DELIVERY OPTIONS
